Login to 192.168.1.1 for configuration of Netlink ONU for BSNL Fiber to Home service to access voice and internet facilities, Add security and enable WiFi in the configuration in Netlink Optical network unit (ONU) to connect the world with high wireless internet…
Let’s have a look at the detailed step by step modem configuration process of Netlink WiFi ONT / ONU (Optical Network Unit) to enable voice and internet facilities, connected GPON BSNL OLT (Optical Line Terminal) providing upstream and downstream data speed at same level accordingly as per the subscribed BSNL broadband plan.
Follow the steps to configure Netlink ONU for any ISP providing Fiber net connection using OLT, Here we are providing BSNL FTTH network configuration in GPON optical modem
- Login to Netlink ONU in any browser with url 192.168.1.1
- Enter username and password
username is admin and default password is stdONU101
- Go to Management > Device Management > Restore default > Restore Factory default
- Click Network > Internet > Delete
- Check Status > Wan Connection info >
WAN info status enabled means, you are ready to browse the internet.
- Click Network > Internet (Add New Connection for Internet)
Mode : Route,
IP Protocol Mode : Ipv4, and select PPPoE,
Enable NAT : Select radio button
Enable Vlan : Enable by select,
Vlan id : Submit the ID provided by BSNL,
Username : Enter BSNL allocated FTTH username followed by @ftth.bsnl.in
Password : password (default)
Service Name : BSNL or which you want,
IP Address: Provide your BSNL allocated IP address,
Port binding : Enable Port 1, Port2 and WLAN (SSID1) by selecting in each box
Click Save - Again Click Network > Internet for Voice Configuration
Connection name : Add new wan connection,
Mode : Route,
IP Protocol Mode : Ipv4, and select Static,
Enable Vlan : Enable by select,
Vlan id : 1830,
Provide your BSNL allocated IP address, Subnet Mask, Default Gateway, DNS1, DNS2, provided by BSNL
Service Mode : Voice
Click Save - Click Application
Enable all the services(ftp, h323, rtsp,ipsec, sip, pptp) in ALG configuration
Save/Apply - Click Application > VOIP
SIP registered address : xx.ftthvoip.bsnl.in (first 5 to be filled as xx.ftth.bsnlvoip.bsnl.in)
Select and Enable Outbound Proxy,
Enable Line 1 and enter Account name, Account number, Account password with allotted BSNL FTTH phone number starting with 91 starting by removing 0
Click Save/Apply - Click Status
WAN Information info for both Voice and Internet facilities are enabled or not.
If having any doubts on this configuration process for Netlink ONU, please do comment and get solved the queries/errors.
Each time when ont gets restarted, the account number in voip application tab gets changed to old account number. How to make the settings as default..
I am unable to connect to optilink using the passwords suggested here Please let me know the default user id and password. That will be of great help. Thanks
Hello, I want to configure the voip number on gs wave app. But the app doesn’t work. Tried zoiper too. Both fails to see the kl.ftth.ims.bsnl.in to validate and register. Also bsnl doesn’t provide static ip for voice now. So the voice is on dhcp.
Another thing is that the phone shows registered in voip status but when I connected normal phone, it doesn’t give a dial tone but a continuous beep. Need to test with an ip phone.
I am using DBC modem But I cannot get dial atone in my phone,
Bad Password error when trying to login as admin on net link router.
The service provider agent might have changed the admin PWD.
ask them
NETLINK GPON/GEPON ONT
MODEL-V2801 SG-R
The admin username and password stdONU101 js not working for me it says error:bad password, Pls help
Go for factory reset. Then
Re configuration has to be done.
If previously wrong configuration did and if it set as default configuration, then modem can not be full factory reset. So you have to send the modem to NETLINK factory (kerela) for services.
Please help me
My modem password not change double problems my username and password this one error see this
where to get all of these info menshened here i wand to reset my router becose the people changed the web login password and they diden’t told us about it
My voip status is showing as registering for bsnl ftth.. Even lco operator is unable to find the issue
நண்பர்களே, மோடம் பாஸ்வேர்டு அனைவருக்கும் சரியாகத்தான் இருக்கும். ஆனால், கான்ஃபிகரேஷன் செய்யும் நபர் அதை மாற்றிவிடுகிறார். இன்று அதை நான் கண்டறிந்தேன். மோடத்தை ரீஸ்டார்ட் செய்தால் அதன் இயல்பு நிலைக்குத் திரும்பும். அதன் இயல்பு நிலை பாஸ்வேர்டைப் பயன்படுத்தலாம். ஆனால், அதில் அமைப்புகள் அனைத்தும் மாறி விடும். அமைப்புகளைச் சரிசெய்யத் தெரிந்தவர்கள் இந்த மெத்தடை முயற்சிக்கலாம். முடியாதவர்கள் கான்ஃபிகரேஷன் செய்த நபரிடம் கேட்டுத் தெரிந்துகொள்ளுங்கள். முடியாதவர்களுக்கு இதுதான் சிறந்த முறை.
Dear friends, password have been reset while configuration by the person/vendor. So, please reset the device to bring the default password to active. But, some person who don’t have the knowledge to do settings for internet will face major issue. So, please ask the password from whom done the configuration ie. Local cable operator/vendor.
Thanks for this website.
netlink gpon ont default login admin and password stdONU101 says bad password.why this says. how i will change my wifi password pls help me
same for me too bro.
Please try using admin1234 as the password.
try stdONU123 It will work.
Reset device then you can access with above password
Just reset and try one more time
dbcONU101 try this one
its stdONUi0i
When i try to login with Username: admin and Password: stdONU101 it saying bad password try again
once try stdONUi0i as the password
Sip address for chennai i have sip address in words (chn.ftthvoip.bsnl.in) but i need sip address in number like (10.xxx.x.x), Any one know chennai/tamilnadu sip address and i have tried 10.187.1.12 – 10.187.12.12 no ping came
HOW TO ALLOCATE PRIORITY FOR SPECIFIC DEVICES CONNECTED TO THE NETLINK GPON-ONTRGW ROUTER..?
Sir status is down sir what can I do
Hi, In Net Link router under Management Tab, I am not getting Sys Log option, hence I am not able to track browsing history. Can you please help me with this?
Try this Password: stdonu101
Any luck same issue
When i try to login with Username: admin and Password: stdONU101 it saying bad password try again. I try a lot and now i can’t suffer this longer, please help me as fast as possible.
I too face same issue.
Yes same for me..i’ve tried all passwords..and dbcONU101 also but still no use..is there any way..help me with this issue for username and password.
I have got BSNL FTTH-CC1A last week, It works well day time for voice and Internet but it automatically switches off around 11pm and switches on at 6:00am, People who installed it have no clue how to solve the problem, Please guide and help.
Ask the vendor to resplice ur connections
Facing same issue, did it got solved?
I have connected netlink ONU to d link router, internet gets slowed or stopped many times…seems dont have problem with d link.. may be netlink onu has some settings, can anybody resolves this up-down of internet
It may be due to Netlink firmware issue, Contact Netlink support.
Does anyone knows how to configure the voip on netlink, If you know you can help by giving information or by anydesk platform. TIA
How do i get the VOIP IP address?
Is there a way to get this from online support for my account?
Hai sir, I am using the BSNL FTTH 400GB CS95 plan for the past 1 month in Andhra Pradesh, Chittoor district. My problems are
1) I am unable to use a youtube mobile on android. But I got to see youtube web it’s working barely.
2) when I connect in wifi mode, Wifi symbol with the exclaimed symbol but background network running, Its really strange.
3) my router name is Netlink. Kindly please provide a solution ASAP. Thank you.
Change the DNS mode to other (make sure that it not to “From ISP or ISP Provided”.
Can u explain what to do if I have to configure NetLink ONU Configuration at 192.168.1.1 for FTTH Internet only? I am confused with this Voice and Internet configuration method.
Just configure upto 7th step for broadband only configuration.
I have 100mbps line (BSNL FTTH), But i get hardly 50Mbps, When i connect to my office VPN the speed goes below 10Mbps.
Ive a typical problem – the Internet works on my firestick TV like Netfix, Prime etc, But the internet does not work on my Laptop or Mobile
set the wireless properties of ipv4 to google dns server 8.8.8.8, mail me for more help on gouravswamy2503@gmail.com
I purchased a permanent IP address and now I want to configure in my router
how will I configure NAT port forwarding
What is server name
what is the server IP address
what are the values I have to give into the columns
Internet IP Address
Start Port
End Port
Protocol
Server IP Address
Port.
just watch a youtube video, they will explain you better
Default username and password (admin/admin) not working for my netlink router. Please help
put username: admin and password: stdONUi0i
Ultimate guide to fix your FTTH problems
Step 1. Disconnect the optic fibre cable
Step 2 . Disconnect the Power cord.
Step 3. Carefully take the modem and keep it aside safely
Step 4. Call 1860-893-3333
Step 5. Ask for Ambani Giga Fibre Connection
Default username and password (admin/stdONU101or admin) not working for my umiway router. Plz guide.
Regards
Sunil
I have the same problem, Is the password onu101?
I have taken ffth BSNL, Now this the 5th month still i am not getting voice, When i call BSNL, they will say your local cable operator has to configure voip, When i call them they said that it is BSNL job. My BSNL no. 0497 296 6794 which is no use. Can any one guide me voip configuration netlink. BSNL Kannur Kerala.
Today BSNL solved my VoIP issue, Now I am able to call and receive.
How they solved?
Sir mera bhi voip registering dikha rha registerd nhi ho rha
simply you can configure in your modem for voice and ask the BSNL side voip username (always your number – 914972966794) and vlan 1831 for voice
My FTTH WiFi shows no internet access problem, and when I see status it will show down from about 20days, I will do the above steps many times but nothing happens. I also calm the vendor, but he did not reply. Tell me what will I do plz help me
Yes this the problem for our modem also
my modem is Netlink, after entering this username and password, it shows a bad password. please reply
Sir after so long comment & replay can anyone notice why is BSNL so, as it was the best landline & broadband provider but after the launch of FTTH it has become simply outward,
1.Lack of employees issue
2.BSNL making way to JIO GIGA FIBER
3.Though BSNL staff willing to do work, something is not letting them do work.
Conclude with RIP BSNL, DOB JIO.
Thank you
I have bsnl fiber 777 plan, I am getting frequent disconnection/connection issue, After 15 minutes connection get disconnected then immediately get connected.
I am also facing the same issue and my landline is also not working in BSNL FTTH.
My FTTH landline is not working either, since the date of new connection, How did you solve yours? Might be helpful for me. Thanks.
The same issue facing with my Bsnl + Netlink, also NAT is restricted, Any help is appreciated, thanks
How to hide SSID(WiFi)?
go to your modem wifi settings and select the option hide SSID or deselect the visible option
BSNL incoming call is not working on ftth voice landline, I couldn’t hear incoming calls coming from BSNL, it was all blank, LCO tired but couldn’t help me
Hi sir,
In every internet call, when I am using phone my/others voice is breaking a lot. Could you please let me know what is the problem.
Regards
I tried to change my wifi password and clicked on apply button, But now iam not able to access internet, Wifi is connected but no internet, Please help me?i think i messed up
I have the same problem can you tell me how you fixed it.
Click on Network -> Internet, Change the PassWord to ‘password’ (without quotes)
You might be changing the modem password. that’s why. To change wify password change pre-shared key on Network > WLAN > WLAN Security tab
rest your router &re-configure
I am able to connect wifi only one android phone, In other android phones it shows connected no internet access but still I am able to access internet on those phones. Please help me to fix this issue.
I got the connection today for Bharath fiber and receive the user password and all and I configure as per this description but still, I am not able to get the connection.
Showing registration status breakdown in VOIP.
I tried each and every password mentioned here but it still says bad password every time, I am frustrated now.
Try user and user.
The admin username and password stdONU101 js not working for me it says error:bad password, Pls help
Syro@43210#$ worked for me
Check the box of router, username and password will be mentioned.
What do I write instead of xx in the VoIP configuration, I tried jk.ftthvoip.bsnl.in (as i live in J&k) but the status is still registering.
Try 10.187.1.12 in place of this address.
Did your VoIP working? Now!
Can you please share me Jammu VoIP details. I am frustrated from bsnl complaint raised and it’s one-month over no one responded, All 8th standard failed guys working in their call centers who don’t even understand your concern.
Please help by sharing
No its not working for me as well since i took connection 2 months back. It always registering . I know setting as it have worked for few i guess. If you search everywhere on internet for voip setting , they will tell to keep static for voice but recently BSNL had discontinued that process i guess .So follow this maybe it will work for you.
In Network section where you configure voice , Just select DHCP in place of STATIC ( Mode:Route,Ipv4,DHCP, Enable VLAN , Vlan ID try1830 or 1831, null, MTU:1500, Request DNS: Enable ; Service mode: Voice ; Select Turn off Lan DHCP (for voice profile only not for internet ); Save . Go to Application :VOIP ; Select Soft switch SIP; SIP Reg. address : 10.187.1.12; All ports will have value 5060 as default : keep as it is; Reg expire (sec) 3600 all places; enable session timer at all places ; session expire 1800 all place ; Enable Line 1 ; account no. and name same : 911912XXXXXX (use 91 in place of 0 and then your landline no. as in bill eg. 0191-2XXXXXX ; then enter as above ). Try password : same as account no. 911912XXXXXX or try 2XXXXXX(without std code). save. Check status :wan info if voice profile status is UP . Also keep SIP : Enable in application. Go to diagnose : enter IP: 10.187.1.12 and Wan interface voice; check if there is no packet loss. For me everything is up for voice ; but it always says registering and also when i call landline no. from mobile it says no. doesn’t exits.
For VOIP:-
Mode: Route
IP protocol mode: ip4 or same as internet
Disable Request DNS.
Primary DNS: 172.30.249.3
Secondary DNS: 172.30.249.19
Service mode: Voice
Leave blank for “Turn of LAN DHCP” (Do not enable)
This worked for me while troubleshooting. No support from customer care or third party contract installers. Hope this works for you all. Thanks.
Hi, how do i route the VoIP calls to Wifi, Where my mobile phone will be connected to the Wifi Router, so i can use my Android Phone SIP settings to make and receive calls.
No internet access problem router restart and re-configuration but still issue so how can solve.
The default username and password is not working (admin/stdONU101), it display’s bad password when I enter this password, please help me!
try this one: dbcONU101
I’ve entered it as dbcONU101 still it shows bad password. what should i do now.plz help me with this.
Same problem for me..this password also not working..could any one help to fix this issue..iam frustrated with this.
Dear Sir,
Please tell me how to disable “AP-isolation” in the above BSNL ONT, problem is that I have the Google Chromecast device, which is not able to set up, in the last moment of setting up the Google Home mobile app says ” Please disable the AP isolation option in your router ” without this, both of the devices can’t communicate over wifi, I have logged in, to my ONT’s web setting but can’t find any particular AP disable option there. Whereas my Google Chromecast is working flawlessly with my all old routers like Jiofi and old TP-link ADSL router. Please help me, I will be grateful.
I have the same problem, Can you please advise if you have found the solution.
Did anyone find a solution for this?
I have my BSNL FTTH connection through a local cable operator and he says his equipment will not support voice and I will not be getting voice. Can that be correct? If so I can quit trying. I have done everything as mentioned here but still, VOIP Info and Service State say Registering. Could you please help.
please purchase ont which support voice and internet.
how to check data usage and present data pack/plan?
Pl advise me admin username and password of Optronix modem Epon for BSNL fibre connection, Thanks
Did u get the? if yes tell here the username pass
Have you got optronix adnin default password? Please tell.
Hi sir,
I had reset my router. and made config exactly what the service guy had told me to do. but my status is still showing down for ipv4, If any suggestions, kindly reply
BSNL has given Optronix WIFI EPON ONT, It working fine, But issue is Keep on rebooting every 60 min or if We start browsing its automatically rebooting, I have raised a request and they changed the new one, But still the same issue with the new one also, can anyone suggest what might be the problem.
Need Bandwidth allocation settings for NETLINK ONU.
how to make the wifi network through net link modem invisible.
network=>Wlan=>Disable Broadcast
I have to configure my landline connection on bsnl fiber, I have syrotech router, I am entering username admin and password stdONU101 but it always says bad password, Please help.
syrotech defualt password is Syro@43210#
how to change the language in the router portal, Language out changed to Chinese need to revert back to english, please help on this
how do I decrease the range of my wireless Syrotech wi-fi modem, My router shows my network to a very large area, how do I reduce the radius of wi-fi.
Please check the configuration steps of Syrotech FTTH ONU or router mentioned at https://99-networks.com/bsnl/syrotech-ont-configuration-ftth/
Kindly inform me how to configure for VOICE in the SHARPVISION ONT Model AS341 WT for BSNL FTTH in CHENNAI Kindly send me your reply to my e-mail(bcskal@rediffmail.com). Thanks.
BSNL Installed optronix OP-GWV-2 ont, the internet is working on it but voice didn’t, please send me the voice configuration for the router.
Sir, jab mai 192.168.1.1 page kholta hun uske baad jab username and password dalkar login dabata hun toh yeh message show karta hai har baar,
ERROR: WEB authentication error!please close this window and reopen your web browser to login,
Please help fast
your username and password may be wrong, Type default username and password i.e, user and again user.
I had typed default username and password but it didn’t work for me, Please help
Can you please tell me on my gmail that is vanshsarna10@gmail.com
Same problem for me as well can you please email me the solution please venki84.venkatesh @gmail.com
Hello,
Have anyone tried URL filtering option via Web Manager? I was able to find the option to enable a blacklisted URL list under Security > WAN Access. However, none of the filters seems to be working. For example, I tried adding
– https:// www. facebook.com/
– facebook. com
etc. However, still, Facebook is accessible from all connected devices. Could someone help me with what I’m doing wrong with router configuration?
Hi, I Also facing the same issue, I tried to set the URL filter in many ways, But still the the Filtered site is accessible through Wifi, How can I block a particular Wifi using Netlink(Model Number:IGD) modem?
Please reply
Is it possible to configure BSNL FTTH VoIP phone with Grand stream Wave application or a SIP phone ? If yes , how ?
Bsnl ftth fiber 777 plan 50mbps speed me pubg nahi chalta he ping high rahta he plz kuch ilaag bataye, Mobil no.9421961519
Mera game bhi nh chal rha h, Koi solution mila kya
change mtu to 1442 or 1460.
None of the Password is working with Syroteck G/EPON-ONU, Please help with password to access.
Hi I changed my BSNL FTTH password using 192.168.1.1, After changing the password I am not able to connect to wifi. Shows an incorrect password. Kindly help.
Hi how do u changed that could u plz tell me..for me it’s always shows as bad password.. how did u login into that FTTH..password shows always as bad password..Help me as soon as possible it’s important for me now.
How to obtain my BSNL VLAN Id and Password for Bharat FIBER FTTH for configuring modem, My Modem “SYROTECH” default username & password is “User”.
Thanks & Regard
Kushal Sharma
+919419159002
kushalsharma1989@hotmail.com
Hi,
Do we have a WPS key in this router? I would like to use wifi extender.
YES IT HAVE WPS AS PAIR BUTTON
How to check data consumption?
My office internal websites are not accessible when connected via VPN, The same were accessible with any other broadband or hotspots, N/w guys have tested the VPN firewall and they are not blocking any IP’s, They say it have to be the router configuration, Can someone help get this done, Any help will be much appreciated.
PS:
I’m using Netlink ONT.
ISP: BSNL – FTTH
This is not the problem of ONT device, and this may be with operator, so please inform to the core network team of BSNL FTTH concerned who is authorized to resolve.
change MTU Value with after asking NIB BSNL.
How should i find my modem password, It is not the default password, when i asked the provider he told me they will not give it as it is danger, Somebody help me out. Is there any way other than resetting the modem.
IF YOU USE ONT THEN YOUR PASS IS stdONU101
I want to open ports, how can I do that, and do I have to make static IP address for this?
I have tried to change the wifi user name and password, It’s getting changed only until next restart, when I restart it’s getting changed to previous one, which was configured by the BSNL officer.
I got the Syro tech ONU installed yesterday, The connection was active and the technician connected by android mobile (Oneplus 6) to the wifi, gave me the wifi password, checked the connection speed (which was about 60 Mbps – 1277 plan) and left.
I have been trying to connect the other devices at home and none of them can access internet from the connection. I tried with Iphone 11, PS4, Ipad, chromebook and the Smart TV, all of them connect to the router but with no internet connectivity. Meanwhile my Oneplus mobile connects seamlessly and shows good download and upload speeds,
I connected a different WiFi router (TP link Archer) to the LAN port and tried connecting other devices. Except for Oneplus, no other phone is able to access internet. Spoke to the person who installed the device and he has no clue.
Can anyone help me?
Hi,
Myself also have the same problem, Earlier, voice call (phone) not working but internet working fine with wifi facility to Laptop, Desk top, Android Mobiles of various brands. Day before yesterday when contacted BSNL person for the voice call issue, he attended and rectified the phone issue, But, now i am not able to connect any of the above said devices through wifi, Internet is available with wired connection (LAN Cable), Again contacted the same BSNL person, he replied that it is due to ont issue and it can be solved by changing ont, If you get any information, please inform me also at the email id provided below, Thanks.
hai sir,
how we can block mac address
Default username and password (admin/stdONU101) not working.
MAY YOUR ISP CHANGE THAT DUE TO SOME SECURITY REASON, AS MANY.
Try username admin
and password adminisp
I also want login interface password if anyone have syrotech or optilink router then plz whatsapp me routers photo from back side plz
Message me on 9960369386.
How to configure QoS for online gaming with LAN1 port priority?
HI SIR HOW TO BLOCK THE USER AND HOW TO CONTROLS USER? LANLINE IS NOT WORKING
How to get VLAN ID if ONT gets reset, To whom I should approach.
Did you get that vlan id. Can you tell me how do get that?
Thanks
Suriya
How to change dns server settings?
Please check the DNS Server Settings page to change at anytime
I am unable to connect sites through https, All sites through http is getting connected. Please advise how to solve it
Use HTTPS Everywhere.
how to know the data consumption, please someone reply me
How to bind mac id wifi
All incoming calls on this ONT disconnects/drops after 9.27 minute, Firmware provided by manufacturer upgraded but still issue not resolved.
I add dyndns configuration with necessary details like hostname, user and password, after that i complete the details while i select the okay button it shows the following error “ILLEGAL User Name”. The above said hostname and user details worked fine in another modem. Kindly guide me how to configure.
Hi
I am getting sufficient downloading speed as per the plan but the uploading speed is really abysmal, Can you please tell me what may be the cause?
How to setup NAT type to open/moderate ??
I want a solution for this.
enable upnp.do you get speed in ps4? i dont get speed in all gaming things, cant even connect to server(less than 1mbps). please help
HOW DO I CHANGE THE WIFI PASSWORD,
Hi Pavan,
Once you login to the page go to “Network” >> WLAN >> WLAN Security.
on this page you will find “Pre-Shared Key” which you can update with your desired password and Apply the changes.
Regards
Darshan
SIP address for Maharashtra BSNL
Ip address for bsnl ftth voice?
FTTH IP address should be differed for circle/area wise, so please contact nearest BSNL JTO/SDE
Is it possible to configure voice over android phone like jio is being provided.
download BSNL pro app from play store then connect ur mobile or laptop then it will show the data consumption